Solvay SolexisMarkets & ApplicationsBuilding & ArchitectureWire & Cable
This Site All Sites

Building and Architecture - Wire & Cable

Solvay Solexis fluoropolymer resins are used extensively in the plenum wire and cable industry. These resins are particularly suited for various over-cable jacketing applications, primary conductor insulation, and as profile-extruded components. Solef® PVDF, Halar® ECTFE, and Hyflon MFA® offer excellent electrical properties that remain consistent and sustain performance within an extreme temperature range. In addition, and of highest importance, each compliment the “all-fluoropolymer” design criteria with regard to fire and smoke plenum requirements.

Algoflon® PTFE has outstanding chemical inertness in aggressive environments, thermal resistance, electrical properties, and non-stick characteristics in a wide range of temperature from cryogenic to 260°C. Additionally, Algoflon® PTFE is nonflammable (limiting Oxygen Index > 95). These properties make Algoflon® PTFE the ideal material for many critical applicatioins. In particular, Algoflon® DF powders are especially suited for over-cable jacketing applications and primary conductor insulation.


List of products Technical Data Sheet
Algoflon® DF291X

Modified fine coagulated TPFE powder for paste extrusion

Algoflon® DF680

Modified fine coagulated PTFE powder for paste extrusion

Algoflon® DF681

Modified fine coagulated PTFE powder for paste extrusion

Halar® 350LC

Medium viscosity - film and rod extrusion

Halar® 500LC

Low viscosity - wire and cable extrusion, injection molding

Halar® 558

Foam extrusion applications

Halar® 930LC

Medium viscosity wire and cable extrusion grade

Hyflon® MFA® F1850-0010

Precompounded foamable fluoropolymer for coaxial cables and primary insulation for unshielded twisted pairs

Hyflon® PFA M620

High molecular weight resin for tube and sheet extrusion, compression, and transfer molding and cable extrusion

Hyflon® PFA M640

Medium molecular weight resin for cable extrusion and injection molding

Hyflon® PFA P420

High molecular weight resin for tube and sheet extrusion, compression and transfer molding and cable extrusion. Suitable for food contact

Hyflon® PFA P450

Medium molecular weight resin for cable extrusion and injection molding. Suitable for food contact.

Solef® 31508

PVDF copolymer with low viscosity

Solef® 60512 Extrusion - Permanent Plasticized Grade For Oil-Related Applications

accueil
© Solvay S.A • Important information : Disclaimer  -  Privacy Policy • 
If you have any comments, please contact the webmaster
Date of last update: 25/2/2010